Möbius company is honored to present the range of products manufactured at our high-tech plant for recycling tires. All materials produced are the result of pyrolysis, a special heat treatment process which is the most reasonable solution to the problem of rubber waste for those who care about the environment and the future of mankind.
Möbius plant is equipped in accordance with all world standards which guarantees the highest quality of end products with minimal harm to the environment.
Products characteristics meet the highest standards. Each product is certified by Ukrainian state product certification system.
Hygienic certificate Poland MOBIUS
Mobius certificate san epid ukr
Möbius company is a direct manufacturer which guarantees optimal conditions for cooperation.
We provide individual approach to every customer. Besides core products we produce materials with the specifications by customer’s request.
This is a new class of adsorbents consisting mainly of carbon (up to 94-97% of the ash-free product), an organic substance, comprising of highly dispersed pyrocarbon powder.
Characteristics | Norm | Analysis results | Analysis technique |
---|---|---|---|
Bulk density at 20°C, max, kg/м3 | 650 | 345,5 | GOST 2160 |
Mass fraction of ash, max, % | 12 | 5,2 | GOST 12596 |
Mass fraction of total sulfur, max, % | 3 | 0,8 | DSTU 3528 |
Moisture content, % | 5 | 2,7 | GOST 12597-67 |
рН of water extract, рН, units | not standardized | 4,5 | GOST 4453-74, p.4.7 |
Flotation, % | not standardized | 98 | Gravimetric (weight) |
Oil retention, % | not standardized | 99 | Washing off from the surface |
Oil adsorption capacity of the product is 4-5g of oil per 1g of adsorbent. *GOST and DSTU - Ukrainian national standards |
Synthetic oil is dark, oily liquid with a characteristic oil odour, black by colour, with a light brown tint.
By its fractional composition synthetic oil contains 35-40% of high-octane gasoline (octane number circa 95) and approximately 55-60% of diesel fuel.
Thus, the yield of light oils out of synthetic oil is 90-95%.
Characteristics | Norm | Analysis technique |
---|---|---|
Густина за температури 20 о С, кг/м 3 , не більше | 915 | ГОСТ 3900 |
Кінематична в’язкість за темпе-ратури 20°С, сСт (мм 2 /с), не більше | 8 | ДСТУ ГОСТ 33 |
Фракційний склад: - 30% пере ганяється за температури ,°С, не вище - 50% пере ганяється за температури ,°С, не вище - 90% пере ганяється за температури ,°С, не вище - 95% пере ганяється за температури ,°С, не вище |
- 260 - 360 |
ГОСТ 2177 метод Б |
Температура спалаху в закритому тиглі, °С, не нижче | 45 | ГОСТ 6356 |
Зольність, %, не більше | 0,25 | ГОСТ 1461 |
Масова частка сірки, %, не більше | 1,0 | ГОСТ 1437 |
Масова частка механічних домішок, %, не більше | 0,25 | ГОСТ 6370 та 7.3 цих ТУ |
Масова частка води, %, не більше | 1,0 | ГОСТ 2477 |
Випробування на мідній пластинці | Витримує | Згідно з ГОСТ 6321 або ДСТУ EN ISO 2160, арбітражний ДСТУ EN ISO 2160 |
Теплота згорання (нижча) за перерахунком на сухе паливо (не браковочна), кДж/кг, не менше | 40100 | ГОСТ 21261 |
These are rectangular shaped metal briquettes (20X20X40 cm).
- High sorption capacity - 36-60 kg (3-5 kg of oil per 1 kg of adsorbent)
- High sorption rate
- Hydrophobic
- Keeping flotation even when fully saturated
- Diameter - 13 cm
- Length - 3 m
- Weight - 10-12 kg
- Anchoring - metal carabiners
- High sorption capacity - 6,5-7 kg of oil
- High sorption rate
- Hydrophobic
- Keeping flotation even when fully saturated
- Reusable
- Dimensions: length x width x height– 40 x 40 x 7 cm
- Weight 1,2-1,5 kg